MIL-DTL-3965H
2.3 Non-Government publications. The following documents form a part of this document to the extent specified
*
herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract.
AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI)
ANSI/NCSL Z540-1
-
Calibration Laboratories and Measuring and Test Equipment,
General Requirements for.
th
(Copies of this document may be ordered online at www.ncsli.org or from NCSL International, 1800 30 Street,
*
Suite 305, Boulder, CO 80701-1026)
*
THE INSTITUTE FOR INTERCONNECTING AND PACKAGING ELECTRONIC CIRCUITS INC. (IPC)
J-STD-004
-
Soldering Fluxes Requirements for.
(Copies of this document can be ordered online at www.ipc.org or from the Institute for Interconnecting and
*
Packaging Electronic Circuits (IPC, INC.), 2215 Sanders Road, Suite 200 south, Northbrook, IL 60062.)
INTERNATIONAL ORGANIZATION FOR STANDARDS (ISO)
ISO 10012-1
-
Equipment, Quality Assurance Requirements for Measuring
Part 1: Meteorological Confirmation System for Measuring Equipment.
(Copies of this document may be ordered online at https://webstore.ansi.org/ or from the American National
*
nd
Standards Institute, 11 West 42 Street, New York, NY 10036-0350.)
2.4 Order of precedence. In the event of a conflict between the text of this document and the references cited
herein (except for related associated specifications or specification sheets), the text of this document takes
precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a specific
exemption has been obtained.
3. REQUIREMENTS
3.1 Specification sheets. The individual item requirements shall be as specified herein and in accordance with the
applicable specification sheets. In the event of any conflict between requirements of this specification and the
specification sheets, the latter shall govern (see 6.2).
3.2 Qualification. Capacitors and brackets furnished under this specification shall be products which are qualified
for listing on the applicable qualified products list at the time set for opening of bids (see 4.4 and 6.3).
3.3 Materials. Materials shall be as specified herein. However, when a definite material is not specified, a material
shall be used which will enable the capacitors to meet the performance requirements of this specification.
Acceptance or approval of any constituent material shall not be construed as a guaranty of the acceptance of the
finished product.
3.3.1 Case. The case shall be of a corrosion-resisting metal or shall be plated or treated to resist corrosion.
3.3.1.1 Sleeving (when applicable). The sleeving shall be of a nonfungus nutrient material. In addition, the
material shall not soften, creep, or shrink to a point where any part of the cylindrical portion of the case is left
uncovered at any test temperature specified herein.
3.4 Solder and soldering flux. Solder and soldering flux shall be of such quality as to enable the capacitors to
meet all of the requirements of this specification.
3.5 Interface and physical dimension requirements. Capacitors shall meet the interface requirements and physical
dimensions specified (see 3.1).
5
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business