MIL-C-5 Capacitors, Fixed, Mica Dielectric, General Specification ForThis specification covers the general requirements for molded and dipped mica dielectric, fixed capacitors intended primarily for use in high-stability, low-loss radio-frequency applications such as tuned circuits \(see 6.1\). This is a graded specification covering ranges in temperature coefficient, capacitance, tolerance, temperature, and vibration.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13

MIL-C-5G

DEPARTMENT OF DEFENSE STANDARDS

Test Method Standard Electronic and Electrical Component Parts.

(Copies of these documents are available online at https://assist.daps.dla.mil/quicksearch/ or

https://assist.daps.dla.mil or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D,

Philadelphia, PA 19111-5094.)

2.3 Non-Government publications. The following documents form a part of this document to the extent specified

herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract.

AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI)

Calibration and Measuring and Test Equipment - General Requirements

(Replaces MIL-STD-45662.)

(Copies of this document may be ordered online at www.ncsli.org or from NCSL International, 1800 30th Street,

Suite 305, Boulder, CO 80701-1026)

THE INSTITUTE FOR INTERCONNECTING AND PACKAGING ELECTRONIC CIRCUITS INC. (IPC)

Requirements for Soldering Fluxes.

Requirements for Electronic Grade Solder Alloys and Fluxed and Non-Fluxed

Solid Solders for Electronic Soldering Applications.

(Copies of these documents can be ordered online at www.ipc.org or from the Institute for Interconnecting and

Packaging Electronic Circuits (IPC, INC.), 2215 Sanders Road, Suite 200 South, Northbrook, IL 60062.)

INTERNATIONAL ORGANIZATION FOR STANDARDS (ISO)

Quality Assurance Requirements for Measuring Equipment - Part I: Metrological

Confirmation System for Measuring Equipment - First Edition.

(Copies of this document may be ordered online at https://webstore.ansi.org/ or from the American National

Standards Institute, 11 West 42nd Street, New York, NY 10036-0350)

2.3 Order of precedence. In the event of a conflict between the text of this document and the references cited

herein (except for related specification sheets), the text of this document takes precedence. Nothing in this

document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained.

3. REQUIREMENTS

3.1 Specification sheets. The individual item requirements shall be as specified herein and in accordance with the

applicable specification sheet. In the event of any conflict between requirements of this specification and the

specification sheet, the latter shall govern (see 6.2).

3.2 Qualification. Capacitors furnished under this specification shall be products that are authorized by the

qualifying activity for listing on the applicable qualified products list before contract award (see 4.4 and 6.3).

3.3 Material. The material shall be as specified herein. However, when a definite material is not specified, a

material shall be used which will enable the capacitors to meet the performance requirements of this specification.

Acceptance or approval of any constituent material shall not be construed as a guaranty of the acceptance of the

finished product.