MIL-PRF-83500A
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and handbooks form a
part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are
those listed in the issue of the Department of Defense Index of Specifications and Standards (DoDISS) and
supplement thereto, cited in the solicitation (see 6.2).
SPECIFICATIONS
DEPARTMENT OF DEFENSE
MIL-PRF-83500/1
-
Capacitors, Fixed, Electrolytic (Nonsolid Electrolyte), Tantalum Anode and
Cathode, Styles CRL01, CRL02, and CRL03.
STANDARDS
FEDERAL
FED-STD-H28
-
Screw Thread Service for Federal Services.
DEPARTMENT OF DEFENSE
MIL-STD-202
-
Test Method Standard Electronic and Electrical Component Parts.
MIL-STD-810
-
Environmental Engineering Considerations and Laboratory Tests.
MIL-STD-1285
-
Marking of Electrical and Electronic Parts.
(Unless otherwise indicated, copies of the above specifications, standards, and handbooks are available from the
Document Automation and Production Service, Building 4D (DPM-DODSSP), 700 Robbins Avenue, Philadelphia, PA
19111-5094.)
2.3 Order of precedence. In the event of a conflict between the text of this document and the references cited
herein (except for related associated specifications, specification sheets, or MS sheets), the text of this document
takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a specific
exemption has been obtained.
3. REQUIREMENTS
3.1 Specification sheets. The individual item requirements shall be as specified herein and in accordance with the
applicable specification sheet. In the event of any conflict between requirements of this specification and the
specification sheets, the latter shall govern (see 6.2).
3.2 Qualification. Capacitors furnished under this specification shall be products that are authorized by the
qualifying activity for listing on the applicable qualified products list before contract award (see 4.3 and 6.3).
3.3 Materials. Materials shall be as specified herein. However, when a definite material is not specified, a
material shall be used which will enable the capacitors and retainers to meet the performance requirements of this
specification. Acceptance or approval of any constituent material shall not be construed as a guaranty of the
acceptance of the finished product.
2
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business