MIL-PRF-39014/22F
Inches
mm
Inches
mm
.004
0.10
.092
2.34
.006
0.15
.128
3.25
.010
0.25
.155
3.94
.012
0.30
.165
4.19
.015
0.38
.185
4.70
.019
0.48
.260
6.60
.020
0.51
.283
7.19
.035
0.89
.320
8.13
.058
1.47
.325
8.26
.090
2.29
NOTES:
1. Leads shall be centered within ±.005 inches (0.13 mm).
2. The angle shall be 95° +10°, -5°.
3. Dimensions are in inches.
4. Metric equivalents are given for general information only.
5. For standard lead length: .140 ±.020 inch (3.56 ±0.51 mm); for optional longer lead length: .170 ±.010 inch
(4.32 ±0.25 mm).
6. The distance between the centers of the mounting holes will be .300 ±.010 inches (7.62 ±0.25 mm).
7. Nonconductive material shall not extend beyond .030 inches (0.76 mm) from the edge of the capacitor body.
FIGURE 1. Style CKR22, CKR23, and CKR24 capacitors - Continued.
REQUIREMENTS:
Dimensions and configuration: See figure 1.
Case type: Molded plastic encapsulated.
Capacitance value: See table III.
Capacitance tolerance: D = ±.5 pF, F = ±1 percent, J = ±5 percent, K = ±10 percent, M = ±20 percent.
Operating temperature range: -55° to +125°C.
Voltage rating: See table III.
Dissipation factor: See table I.
Dielectric withstanding voltage: Body insulation shall be able to withstand 500 V dc between leads and case.
Insulation resistance (IR):
At +25°C: Not less than 100,000 megohms or 1,000 megohm-microfarads, whichever is less.
At +125°C: Not less than 10,000 megohms or 100 megohm-microfarads, whichever is less.
Voltage-temperature limits: See table I. For capacitors with values of 18 pF or less, the voltage-temperature limits
tolerance shall be determined in accordance with table II.
2
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business