MIL-C-62F
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this specification. This
section does not include documents cited in other sections of this specification or recommended for additional
information or as examples. While every effort has been made to ensure the completeness of this list, document
users are cautioned that they must meet all specified requirements documents cited in sections 3 and 4 of this
specification, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and handbooks form a
part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are
those cited in the solicitation or contract (see 6.2).
SPECIFICATIONS
(See supplement 1 for list of applicable specification sheets.)
STANDARDS
FEDERAL
Screw Thread Standards for Federal Services.
DEPARTMENT OF DEFENSE
-
Test Method Standard Electronic and Electrical Component Parts.
-
Marking of Electrical and Electronic Parts.
(Copies of these documents are available online at https://assist.daps.dla.mil/quicksearch/ or
https://assist.daps.dla.mil or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D,
Philadelphia, PA 19111-5094.)
2.3 Non-Government publications. The following documents form a part of this document to the extent specified
herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract.
AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM)
-
Standard Guide for Specifying the Chemical Composition and Selecting Sampling
Practices and Quantitative Analysis Methods for Metals, Ores, and Related Materials.
(Copies of these documents are available online at https://www.astm.org or application for copies should be
addressed to the American Society for Testing and Materials, 100 Barr Harbor Drive, West Conshohocken, PA
19428-2959.
2.4 Order of precedence. In the event of a conflict between the text of this document and the references cited
herein (except for related associated specifications, specification sheets, or MS sheets), the text of this document
takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a specific
exemption has been obtained.
3. REQUIREMENTS
3.1 Specification sheets. The individual part requirements shall be as specified herein and in accordance with the
applicable specification sheet. In the event of any conflict between any requirements of this specification and the
specification sheet, the latter shall govern (see 6.2).
3
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business