MIL-PRF-39001/5E
Thermal shock: In accordance with MIL-PRF-39001 except high temperature shall be as follows:
Symbol O - +125°C.
Symbol P - +150°C.
Immersion: In accordance with MIL-PRF-39001 except ĆCap.- shall not exceed ±1 percent or 1pF,whichever is
greater, of reference measurement.
Terminal strength:
Pull test - For style CMR03 and CMR04, pull shall be applied in the direction of the leads.
Moisture resistance: In accordance with MIL-PRF-39001 except ĆCap. shall not exceed ±1 percent or 1 pF,
whichever is greater, of reference measurement.
Life:
Forty eight hours, minimum, at -55°C +0°C, -2°C immediately followed by qualification or quality conformance
test, as applicable.
Qualification test: 2,000 hours at applicable high test temperature with 100 percent or 150 percent of rated dc
voltage applied, as applicable.
DWV
-
Meet initial requirement.
IR
-
Meet initial requirement.
ĆCap.
-
Shall not exceed ±1 percent or 1 pF, whichever is greater, or the initial measurement.
DF
-
Not greater than 150 percent of initial requirement.
Quality conformance test: 2,000 hours (M, P, R, and S FRLs) at applicable high test temperature and 150
percent of rated dc voltage; requirements as specified for qualification.
Resistance to soldering heat: In accordance with MIL-PRF-39001 except ĆCap. shall not exceed ±1 percent or 1
pF, whichever is greater, of the initial measurement.
Marking: Capacitors shall be marked as indicated in examples on figure 2.
6
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business