MIL-PRF-19978/10B
REQUIREMENTS:
Design and construction:
Dimensions and configuration: See figure 1 and table II.
Case material: Nonmagnetic (end seal may be of magnetic material).
Terminals: Axial-wire lead (see figure 1).
3
Rated voltage: See table II.
Rated temperature: -65° to +125°C.
Capacitance (Cap.) (nom): See table II.
Capacitance tolerance: See table II.
Dissipation factor (DF) (max): 1.0 percent.
Failure rate level: In accordance with MIL-PRF-19978.
Reliability: In accordance with MIL-PRF-19978.
Burn-in: In accordance with MIL-PRF-19978.
Radiographic inspection: In accordance with MIL-PRF-19978.
Seal: Method 112 of MIL-STD-202, test condition letter A.
Barometric pressure: In accordance with MIL-PRF-19978.
Test points:
Circuit diagram 1: Between terminals and case.
Circuit diagram 3: Between ungrounded terminal and case.
Insulation resistance (IR):
Terminal to terminal: See table I.
Terminal to case: Greater than 10,000 megohms.
Vibration, high frequency: Method 204 of MIL-STD-202, test condition B, with the following exception:
Direction and duration of motion: 4 hours in each of two mutually perpendicular directions (total of 8 hours), one
parallel and the other perpendicular to the cylindrical axis.
Salt spray: In accordance with MIL-PRF-19978.
Solderability: In accordance with MIL-PRF-19978.
Terminal strength: Method 211 of MIL-STD-202, test condition letter D.
2