MIL-PRF-39022/7D
IR:
Terminal to terminal: Not less than 33.3 percent of value specified in table III.
Terminals to case: 5,000 megohms, minimum.
Capacitance: Within ± 10 percent of initial value.
DF: Not to exceed 110 percent of initial limit.
Solderability: Method 208 of MIL-STD-202.
Shock (specified pulse): Method 213 of MIL-STD-202, condition I. DC voltage equivalent to rms rating shall be
applied.
Moisture resistance: Method 106 of MIL-STD-202.
DWV, IR, Capacitance, and DF: Same as for immersion.
Terminal strength: Method 211 of MIL-STD-202, conditions A and D.
Condition A: Applied force 5 pounds.
Condition D: 3 rotations of 360 degrees.
Low temperature and capacitance change with temperature:
Low temperature: -55°C +0°C, -3°C for 48 hours ± 4 hours with rated voltage applied.
Capacitance change with temperature:
At -55°C +0°C, -3°C: -3 percent, maximum.
At +85°C +4°C, -0°C: -3 percent maximum.
Fault count: Not applicable.
Fungus: Method 508 of MIL-STD-810, procedure I.
Resistance to soldering heat: Method 210 of MIL-STD-202, condition C, except the time shall be 10 seconds
± 1 second.
IR: See table III.
Capacitance: Within ± 5 percent of initial value.
DF: Not more than 1.0 percent.
Life: Method 108 of MIL-STD-202.
5