MIL-PRF-39022/2G
REQUIREMENTS:
Case material: Nonmagnetic (end seal may be of magnetic material).
Capacitance value: See table I.
Capacitance tolerance: ±5 percent and ± 10 percent.
Rated voltage: See table I.
Dielectric material: Normally paper-polyethylene-terephthalate.
Operating temperature range: -55°C to +125°C.
Failure rate level (%/1000 hours): M (1.0), P (0.1), R (0.01), and S (0.001).
Radiographic inspection (X-ray): Method 209 of MIL-STD-202.
Thermal shock: Method 107 of MIL-STD-202, condition A, except step 3 shall be +125°C +4°C, -0°C.
Seal: Method 112 of MIL-STD-202, condition A, or (for liquid-filled units only) 1 hour at +125°C +4°C, -0°C with no
evidence of leakage.
Dielectric withstanding voltage (DWV): Method 301 of MIL-STD-202.
Terminal to terminal: 200 percent of rated voltage.
Terminals to case (when case is not a terminal): 200 percent of rated voltage.
For 100 percent inspection:
250 percent of rated voltage for not less than 5 seconds, or
200 percent of rated voltage for not less than 15 seconds.
Insulation resistance (IR): Method 302 of MIL-STD-202.
Terminal to terminal: See table II.
Terminal to case (when case is not a terminal): 10,000 megohms, minimum.
Capacitance: Method 305 of MIL-STD-202.
Dissipation factor (DF): 1 percent.
Barometric pressure (reduced): Method 105 of MIL-STD-202, condition D (100,000 feet).
125 percent of rated voltage applied: See MIL-PRF-39022 for voltage limitations.
Vibration, high frequency: Method 204 of MIL-STD-202, condition D (20 g's peak).
50 percent of rated voltage applied.
2
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business