MIL-PRF-39022/11D
Moisture resistance: Method 106 of MIL-STD-202.
DWV, IR, Capacitance, and DF: Same as for immersion.
Terminal strength: Method 211 of MIL-STD-202, conditions A and C.
Condition A: Applied force 5 pounds.
Condition C: Applied force 5 pounds.
Low temperature and capacitance change with temperature:
Low temperature: In accordance with MIL-PRF-39022.
Capacitance change with temperature (maximum):
At -55°C: 0 to -1.7 percent.
At +25°C (retrace): ±0.25 percent.
At +125°C: +1.2 percent to -0.7 percent.
Fungus: Method 508 of MIL-STD-810.
Resistance to solvents: Method 215 of MIL-STD-202, condition B.
ΔCapacitance: Maximum of ±0.25 percent.
Life (at +100°C): Method 108 of MIL-STD-202.
Accelerated conditions: 140 percent of dc rated voltage for 2,000 +72, -0 hours.
Rated condition: 100 percent of dc rated voltage for 10,000 +96, -0 hours.
DF: (At +100°C) between 24 and 48 hours of test - see initial requirement.
IR: Terminal to terminal not less than 33.3 percent of initial requirement.
The current to each capacitor will be limited to 1 ampere maximum by a series resistor.
Marking: Marking shall be in accordance with MIL-PRF-39022, except the minimum marking as shown in the
following example will be permitted. Full marking shall be included on the package.
EXAMPLE OF MINIMUM MARKING
6
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business