MIL-PRF-39014/23B
REQUIREMENTS:
Dimensions and configuration: See figure 1.
Case type: Molded and preformed.
Capacitance value: See table I.
Capacitance tolerance: See table I.
Operating temperature range: -55°C to -125°C.
Voltage rating: See table I.
Radiographic inspection (failure rate level "S" only): In accordance with MIL-PRF-39014.
Dissipation factor: Not more than 2.5 percent.
Dielectric withstanding voltage:
Body insulation: Shall be able to withstand 1,300 volts between leads and case.
Insulation resistance (IR):
At 25°C - Not less than 100,000 megohms or 1,000 megohm-microfarads whichever is less
At 125°C - Not less than 10,000 megohms or 100 megohm-microfarads whichever is less.
Voltage-temperature limits: In accordance with MIL-PRF-39014.
Capacitance change with reference to 25°C
Step A through step D of table V of Step E through step G of table V of
Bias = rated voltage
Bias = 0 volts
±15 percent
+15, -25 percent
Immersion:
IR - Not less than 50 percent of initial 25°C requirement.
Salt spray (corrosion): Not applicable.
Resistance to soldering heat:
ĆC -
+15, -5 percent from initial 25°C measurement.
Life:
Rated conditions, 100 percent of dc rated voltage at 125°C.
0 hour through 3,000 hours:
At 25°C, not less than 50 percent of initial 25°C requirement.
IR -
At 125°C, not less than 50 percent of initial 125°C requirement.
-
ĆC -
±20 percent from initial measured value.
Dissipation factor - Not greater than 2.5 percent.
2
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business