MIL-C-11015/25C
Salt spray (corrosion): Not applicable.
Terminal strength: In accordance with MIL-C-11015, 5 pounds applied.
Moisture resistance: In accordance with MIL-C-11015.
DWV - 250 percent of rated voltage
IR - 10,000 megohms, minimum, or 100 megohm-microfarads, whichever is less.
Cap. - Change not more than 2 percent for voltage-temperature limits BT and BU, and 5 percent for voltage-
temperature limit BV.
DF - Not greater than initial requirement.
Solderability: In accordance with MIL-C-11015: 2 terminals.
Resistance to soldering heat: In accordance with MIL-C-11015.
IR - 100,000 megohms, minimum, or 1,000 megohm-microfarads, whichever is less.
Cap. -
5 percent of initial measured value.
DF - Not greater than initial requirement.
Voltage-temperature limits - In accordance with MIL-C-11015 except capacitance change shall be as specified in
table II herein.
Life (at elevated ambient temperature): In accordance with MIL-C-11015.
Test potential - 200 percent of rated voltage.
IR - At 25 C; not less than 10,000 megohms or 100 megohm-microfarads, whichever is less.
At 125 C, not less than 1,000 megohms or 10 megohm-microfarads, whichever is less.
Cap. - Change not greater than 2 percent for voltage-temperature limit BT, 5 percent for voltage-temperature
limit BU, and 20 percent for voltage-temperature limit BV.
DF - Not greater than initial requirement.
Marking: In accordance with MIL-C-11015.
Changes from previous issue: Marginal notations are not used in this revision to identify changes with respect to
the previous issue due to the extent of the changes.
Custodians:
Preparing activity:
Air Force 11
DLA - CC
Navy EC
DLA - CC
(Project 5910-2069-12)
4
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business