MIL-PRF-55681/1F
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for general information only.
3. For style CDR01, termination width shall be .010 inch (0.25 mm), minimum; uncovered band width shall be
.030 inch (0.76 mm), minimum.
4. Dimensions and tolerances are for bare chips. For solder coated terminations, for style CDR01 add .020 inch
(0.51 mm) to the positive length tolerance and .015 inch (0.38 mm) to the positive width and thickness
tolerance. For solder coated terminations for styles CDR02, CDR03, and CDR04, add .025 inch (0.64 mm) to
the positive length tolerance and .015 inch (0.38 mm) to the positive width and thickness tolerance.
FIGURE 1. Styles CDR01, CDR02, CDR03, and CDR04 capacitors - Continued.
REQUIREMENTS:
Capacitance value: See table I.
Capacitance tolerance: J = ±5 percent; K = ±10 percent; M = ±20 percent. See table I.
Rated voltage: See table I.
Operating temperature range: -55°C to +125°C.
Product level designator: Non-established Reliability - C; Established Reliability - M, P, R, and S.
Marking: In accordance with MIL-PRF-55681.
2
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business