MIL-PRF-39014/2L
*
Salt atmosphere (corrosion) (salt spray): Not applicable.
*
Resistance to soldering heat: Shall be in accordance with method 210 of MIL-STD-202, test condition C.
ĆC: +15 percent, -5 percent of the initial 25°C measurement.
Solderability: The leads shall be solderable up to .020 inch (0.51 mm) from the body egress.
Workmanship: For optional standoff configuration, exposed copper or bare leads shall be permitted to a maximum
of .020 inch (0.51 mm) from the body egress. For parts without standoffs, workmanship shall be in accordance
with MIL-PRF-39014.
Life:
Rated conditions, 100 percent of dc rated voltage at 125°C.
0 hour through 3,000 hours:
IR: At 25°C, not less than 50 percent of initial 25°C requirement.
At 125°C, not less than 50 percent of initial 125°C requirement.
ĆC: ±20 percent from initial measured value.
Dissipation factor: Not greater than 2.5 percent.
4,000 hours through 32,000 hours:
IR: At 25°C, not less than 15 percent of initial 25°C requirement.
At 125°C, not less than 15 percent of initial 125°C requirement.
ĆC: ±20 percent from initial measured value.
Dissipation factor: Not greater than 2.5 percent.
Accelerated conditions, 200 percent of dc rated voltage at 125°C.
0 hour and 250 hours:
IR: At 25°C, not less than 50 percent of initial 25°C requirement.
At 125°C, not less than 50 percent of initial 125°C requirement.
ĆC: ±20 percent from initial measured value.
Dissipation factor: Not greater than 2.5 percent.
1,000 hours, 2,000 hours, and 4,000 hours:
IR: At 25°C, not less than 15 percent of initial 25°C requirement.
At 125°C, not less than 15 percent of initial 125°C requirement.
ĆC: ±20 percent from initial measured value.
Dissipation factor: Not greater than 2.5 percent.
Part or Identifying Number (PIN): Established reliability - M39014/02-(dash number from table I).
Nonestablished reliability - M39014/02C- (failure rate level M dash number from
table I).
Supersession data: See table II.
3