MIL-PRF-20/35K
Workmanship: For style CCR05 with standoff, exposed copper or bare leads shall be permitted to a maximum of
.020 inch (0.51 mm) from the body egress. For style CCR05 without standoff, workmanship shall be in
accordance with MIL-PRF-20.
Temperature coefficient and capacitance drift: In accordance with MIL-PRF-20. For capacitors with values of 18
pF or less, the temperature coefficient tolerance shall be determined in accordance with table II.
TABLE II. Temperature coefficient tolerances.
Permissible capacitance change from capacitance at +25°C in ppm/°C
Characteristic
Temperature
CX
CK
CJ
CH
CG
±250 ppm/°C
±120 ppm/°C
±60 ppm/°C
±30 ppm/°C
+125°C
1/
-55°C 2/
1/
+246.25
+116.25
+55.00
+27.50
-326.25
-166.25
-91.25
-53.75
1/ Not practically measurable.
2/ The ppm/°C values for -55°C were calculated by dividing ppm by negative 80°C.
Life: In accordance with MIL-PRF-20, operating condition 2.
Part or Identifying Number (PIN): In accordance with MIL-PRF-20 and table I.
Marking: Method I of MIL-STD-1285. At the option of the manufacturer, the marking may be placed on one side
of the capacitor, or the marking may be placed on two lines as long as it is in the same order as shown in the
following examples:
NON-ER
ER
BACK
FRONT
BACK
FRONT WITHOUT STANDOFFS
DATE CODE
DATE CODE
1120
CC05
CCR0
1120
CAGE
CAGE
AJ1
CH
5CH1
A1
2345
100F
00FM
2345
PIN
LOT CODE
PIN
LOT CODE
& "J" BRAND
FRONT WITH STANDOFFS
CCR0
5CH1
00FMV
PIN
5
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business