MIL-C-62-6 Capacitors, Fixed, Electrolytic \(Dc, Aluminum, Dry Electrolyte, Polarized\) Styles Ce41 And Ce44

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9

MIL-C-62/6D

REQUIREMENTS:

Dimensions and configuration: See figure 1 and table I.

Case type: Tubular (uninsulated (CE41) and insulated (CE44).

Capacitance value: See table I.

Capacitance tolerance:

At 200 volts, dc rated, and above: -10,+50 percent.

At 150 volts, dc rated, and less: -10,+75 percent.

Operating temperature range: -40�C to +85�C.

DC leakage: See table I.

Dissipation factor: See table I.

Terminal strength: Method 211of MIL-STD-202, test conditions A, B, and E.

Shock (Specified pulse): Method 213 of MIL-STD-202, test condition I.

Vibration, high frequency: Method 204 of MIL-STD-202, test condition B.

Salt atmosphere (corrosion): Method 101, test condition B, MIL-STD-202.

Temperature cycling and immersion:

Thermal shock: Method 107 of MIL-STD-202, test condition A.

Immersion: Method 104 of MIL-STD-202, test condition C.

DWV (insulating sleeves): Method 301 of MIL-STD-202. 4, 000 volts dc applied.

DCL: Not more than 150 percent of initial measurement.

Capacitance change: 5 percent.

Corrosion: Not more than 10 percent.

Insulation resistance (insulating sleeve): Not less than 100 megohms.

DWV (insulating sleeves): Method 301 of MIL-STD-202. 4,000 volts dc applied.

DCL: Not more than 150 percent of initial requirement.

Capacitance change: 5 percent.