MIL-C-62/2D
REQUIREMENTS:
Case type: Tubular, uninsulated (CE12) and insulated (CE13).
Capacitance value: See table I.
Capacitance tolerance:
At 200 volts, dc rated, and above:
-10, +50 percent.
At 150 volts, dc rated, and less:
-10, +75 percent.
Operating temperature range:
-40C to +85C.
Solderability: Method 208 of MIL-STD-202.
DC leakage: See table I.
Capacitance: Method 305 of MIL-STD-202.
Dissipation factor: See table I.
Terminal strength: Method 211 of MIL-STD-202, test conditions A and D.
Shock, medium impact: Method 205 of MIL-STD-202, test condition C.
Vibration, high frequency: Method 204 of MIL-STD-202, test condition B.
Salt atmosphere (corrosion): Method 101 of MIL-STD-202, test condition B.
Temperature cycling and immersion:
Temperature cycling: Method 102 of MIL-STD-202, test condition D.
Immersion: Method 104 of MIL-STD-202, test condition C.
DWV - Insulating sleeves - Method 301 of MIL-STD-202. 4,000 volts dc applied.
DCL - Not more than 150 percent of initial measurement.
Capacitance change - 5 percent.
DF - See table I.
Corrosion - Not more than 10 percent.
Moisture resistance: Method 106 of MIL-STD-202.
Insulation resistance (insulating sleeve) - Not less than 100 megohms.
DWV - Insulating sleeves - Method 301 of MIL-STD-202. 4,000 volts dc applied.
DCL - Not more than 150 percent of initial requirement.
Capacitance change - 5 percent.
8
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business