MIL-C-18312/3D
Dissipation factor:
At ±25°C: 1.0 percent.
At high test temperature: 2.0 percent.
Insulation resistance:
Terminal to terminal: See table III.
Terminal to case (case not a terminal): 10,000 megohms.
Barometric pressure: Method 105 of MIL-STD-202. Test condition: .82 inches of mercury (80,000 ft).
Vibration, low frequency: Method 204 of MIL-STD-202, condition B.
Thermal shock: Method 107 of MIL-STD-202, condition A, except the high temperature shall be +125°C.
Immersion: Method 104 of MIL-STD-202, condition C.
Insulation resistance:
Terminal to terminal: Not less than 1/3 the value specified in table III.
Terminal to case (case not a terminal): 5,000 megohms, minimum.
Dielectric withstanding voltage:
Terminal to terminal: 150 percent of rated dc voltage.
Terminal to case (case not a terminal): 200 percent of rated dc voltage.
Capacitance change: Not to exceed 10 percent of initial value.
Dissipation factor: Not to exceed 110 percent of initial requirement.
Solderability: Method 208 of MIL-STD-202.
Terminal strength: Method 211 of MIL-STD-202, conditions A and D.
Condition A: Applied force 4 1/2 pounds.
Condition D: 3 twists of 360 degrees.
Low temperature and capacitance change with temperature.
Conditions: 48 hours with rated voltage applied.
Capacitance change: See table III.
4