MIL-C-11015/29E
Vibration, high frequency: In accordance with MIL-C-11015 and method 204 of MIL-STD-202, condition B (15 g's).
Thermal shock and immersion: In accordance with MIL-C-11015.
IR: 1,000 megohms, minimum.
*
Salt atmosphere (corrosion): Not applicable.
Terminal strength: Not applicable.
Moisture resistance: In accordance with MIL-C-11015.
IR: 1,000 megohms, minimum.
ĆCap.: Within ±10 percent of initial measurement.
Solderability: In accordance with MIL-C-11015; 1 terminal.
Resistance to soldering heat: Not applicable.
Voltage-temperature limits: In accordance with MIL-C-11015 (symbol BX or AW as specified in table I).
Life (at elevated ambient temperature): In accordance with MIL-C-11015.
Test potential: 200 percent of rated voltage.
IR: 2,500 megohms, minimum (at 85°C).
5,000 megohms, minimum (at 25°C).
DF: 5 percent, maximum (at 25°C).
Marking: Capacitors shall be marked as shown on the figure (marking shall conform to method II of MIL-STD-
1285). The PIN, date and source codes, manufacturer's name or trademark, capacitance, and dc rated voltage
shall be marked on the package.
Changes from previous issue: The margins of this specification sheet are marked with asterisks to indicate where
changes from the previous issue were made. This was done as a convenience only and the Government
assumes no liability whatsoever for any inaccuracies in these notations. Bidders and contractors are cautioned to
evaluate the requirements of this document based on the entire content irrespective of the marginal notations and
relationship to the last previous issue.
Custodians:
Preparing activity:
Navy EC
DLA - CC
DLA - CC
(Project 5910-2189)
4