MIL-C-11015/24F
Barometric pressure (reduced): In accordance MIL-C-11015 and method 105 of MIL-STD-202, condition D
(100,000 ft).
Test potential - 150 percent of rated voltage.
Insulation resistance (IR): In accordance with MIL-C-11015 and method 302 of MIL-STD-202 (measured with
rated voltage applied), 100,000 megohms, minimum or 1,000 megohm-microfarads, minimum, which-ever is less.
Dissipation factor (DF): 2.5 percent, maximum.
Vibration, high frequency: In accordance with MIL-C-11015 and method 204 of MIL-STD-202, condition D (20 g's).
Thermal shock and immersion: In accordance with MIL-C-11015.
DWV - 250 percent of rated voltage.
IR - Not less than 50 percent of initial +25 C requirement.
Salt spray (corrosion): Not applicable.
Terminal strength: In accordance with MIL-C-11015 except for test condition A, the applied load shall be 3 pound
for all styles except CK54 and CK55 which shall be 5 pounds.
Moisture resistance: In accordance with MIL-C-11015.
DWV - 250 percent of rated voltage.
IR - Not less than 50 percent of initial +25 C requirement for styles CK41, CK42 and CK43.
Not less than 10 percent of initial +25 C requirement for styles CK50, CK51, CK52, CK53, CK54 and CK55.
Cap. - Within 10 percent of initial measured value.
Solderability: In accordance with MIL-C-11015; 2 terminals.
Resistance to soldering heat: In accordance with MIL-C-11015.
IR - Not less than initial +25 C requirement.
Cap. - Within 5 percent of initial measured value.
DF - 3.0 percent, maximum.
Voltage-temperature limits: In accordance with MIL-C-11015.
7
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business