MIL-C-11015/20D
Salt spray (corrosion): Not applicable.
Terminal strength: In accordance with MIL-C-11015
CK12 and CK13 - 3 pounds.
CK14, CK15, and CK16 - 5 pounds.
Moisture resistance: In accordance with MIL-C-11015.
DWV - 250 percent of rated voltage.
IR - Not less than 10 percent of initial requirement.
Cap. - Within 10 percent of initial measured value.
Solderability: In accordance with MIL-C-11015; 2 terminals.
Resistance to soldering heat: In accordance with MIL-C-11015.
IR - 100,000 megohms, min or 1,000 megohm-microfarads, min, whichever is less.
Cap. - +15, -5 percent of initial measurement.
DF - 2.5 percent, max.
Voltage-temperature limits: In accordance with MIL-C-11015.
Life (at elevated ambient temperature): In accordance with MIL-C-11015.
Test potential - 200 percent of rated voltage.
IR - 5,000 megohms, min or 50 megohm-microfarads, min, whichever is less (at 125 C), and not less than
15 percent of initial requirement (at 25 C).
DF - 2.5 percent, max (at 25 C).
Marking: In accordance with MIL-C-11015.
Changes from previous issue: Marginal notations are not used in this revision to identify changes with respect to
the previous issue due to the extent of the changes.
Inactivated styles: For new design units of MIL-PRF-39014/5 should be used as listed in table II. Although table II
lists only the highest failure rate level, lower failure rate levels may be considered. For substitutability of the
inactivated styles, established reliability capacitors in MIL-PRF-39014/5 of the same capacitance value, tolerance,
rated voltage, and temperature coefficient can be used regardless of the failure rate designation.
5
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business