MIL-PRF-123/2F
REQUIREMENTS:
Dimensions and configuration: See figure 1.
Case type: Molded or preform.
Lead wire: Termination C in accordance with MIL-PRF-123.
Capacitance value: See table I.
Capacitance tolerance: See table I (F = ±1 percent; J = ±5 percent; K = ±10 percent).
Operating temperature: -55°C to +125°C.
Voltage rating: See table I (B = 50 Vdc; C = 100 Vdc; D = 200 Vdc).
Marking: In accordance with MIL-PRF-123, example 2.
Extension of qualification option: For MIL-PRF-123/2, manufacturers that are currently qualified to a subset of the
full capacitance range for a given voltage rating and voltage-temperature characteristic; qualification to additional
capacitance values may be granted based upon successfully meeting MIL-STD-790 requirements, in-process
inspection, and group A and group B inspections for those values. This qualification option is restricted to a given
voltage rating and voltage-temperature characteristic. The highest capacitance value qualified can be the basis for
qualifying lower capacitance values of the same voltage rating and voltage temperature characteristic.
Referenced documents. In addition to MIL-PRF-123, this specification sheet references the following document:
Changes from previous issue. The margins of this specification sheet are marked with vertical lines to indicate where
changes from the previous issue were made. This was done as a convenience only and the Government assumes
no liability whatsoever for any inaccuracies in these notations. Bidders and contractors are cautioned to evaluate the
requirements of this document based on the entire content irrespective of the marginal notations and relationship to
the last previous issue.
Custodians:
Preparing activity:
Army - CR
DLA - CC
Navy - EC
Air Force - 19
(Project 5910-2014-003)
DLA - CC
NASA - NA
Review activities:
Air Force 85, 99
NOTE: The activities listed above were interested in this document as of the date of this document. Since
organizations and responsibilities can change, you should verify the currency of the information above using ASSIST
Online database at https://assist.dla.mil.
4
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business